Monel K500 Flanges Manufacturers, Monel K500 Flanges Suppliers, Monel K500 Flanges Stockists, Monel K500 Flanges Exporters

Nickel 200 Flanges Manufacturers in Israel, Nickel 200 Flanges Suppliers in Israel, Nickel 200 Flanges Stockists in Israel, Nickel 200 Flanges Exporters in Israel

These Nickel 200 Flanges have two or three better calibres, for instance, magneto strictive, electrical, and impacting warm to a lot of miserable standard variables, nearby raised electrical and warm conductivities, low gas content, and low smoke pressure. Our WNR 2.4066 flanges are available to our best clients in different breadths, wall thicknesses, and sizes at truly sensible rates.

AISI 200 Nickel Alloy Flanges Specification

Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

Standards : ASTM, ASME Flanges, ANSI Flanges, DIN Flanges, EN Flanges, BS Flanges etc.

Specifications : ASTM B564 / ASME SB 564

Length : 100 mm To 3000 mm Long & Above

Size : 1 / 2″NB TO 60″NB

Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, ASA 150#, ASA 300# DIN ND 6,10,16,25,40 Etc.

Grade : Nickel Alloy 200 (UNS No. N02200)

Our Nickel Alloy 200 Flanges conforms to NACE MR0175/ISO 15156

ASTM B564 Nickel Alloy 200 Flanges Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	GOST	AFNOR	JIS	BS	EN
Nickel 200	2.4066	N02200	НП-2	N-100M	NW 2200	NA 11	Ni 99.2

200 Nickel Alloy Flanges Chemical Properties

Grade	Ni	Fe	C	Mn	Si	Cu	Mg	Ti	S
Nickel 200	99.0 min	0.4 max	0.15 max	0.35 max	0.1 max	0.25 max	-	-	0.01 max

200 Nickel Alloy Flanges Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.9 g/cm3	1446 °C (2635 °F)	Psi – 67000 , MPa – 462	Psi – 21500 , MPa – 148	45 %